iBlocks™

Low economical cost. Various sizes to accommodate insulation thickness. Standard softwood, hardwood, or High Density Fiberglass. Bundled inside of the box for ease of handling. Each package clearly labeled with type, size and quantity. Ship along with iShields™ for freight allowance.

HD Fiberglass iBlock™ Supports are composed of a 20 PCF density molded fiberglass which is yellow in color. Fiberglass iBlocks™ are designed to be used along with the iShields™ to ensure that the pipe insulation does not compress at each hanger location. Fiberglass iBlock™ Supports enhance thermal and vibration control properties of the entire insulation system.

Insulation Component’s Pinewood iBlocks™ are used along with iShields™ to ensure that the pipe insulation does not compress at each hanger location.

Insulation Component’s Hardwood iBlocks™ are used along with iShields™ to ensure that the pipe insulation does not compress at each hanger location.

Old Method

Step 1

Place IC iBlock Support into pipe insulation in the location of future IC Pipe iShield and clevis hanger position and cut around the wood block to get the desired size of block.

Step 2

Step 1

Pull " Block Section" out of pipe insulation that was done in Step 1.

Step 3

Step 1

Step 3

Replace the "Block Section" with an IC iBlock Support into the pipe insulation in the location of future IC Pipe iShield and clevis hanger position.

Step 4

Step 3

Wrap the pipe insulation around the Iron Pipe and place in the location of future IC Pipe iShield and clevis hanger position.

Step 5

Step 4

Step 5

Begin by lifting the appropriately sized IC Pipe iShield upwards towards the insulated pipe to just outside the hanger location. Proceed by sliding the IC Pipe iShield underneath the hanger until the hanger is in the middle of the iShield.

Old Method

Step 1

Step 1

Step 1

Step 2

Step 1

Step 1

Step 3

Step 1

Step 3

Step 4

Step 4

Step 3

Step 5

Step 4

Step 5

OLD METHOD